Request our product sheets
Product data sheets provide essential information on the specifications, properties and safe handling of our products.
Thermal Lances
Melt any ferrous and non-ferrous material
These lances have 2.5 mm diameter wires embedded longitudinally in the tube.
The lay out of these wires can be of Type T or W, with standard length of 3 m and coupling at one end.
It works at a pressure of 100 to 120 PSI of oxygen.
Heat generation up to 4000°C for cutting all types of materials with a melting point lower than 4000°C.
It does not produce noise or vibrations.
Available in lengths of 2.75 m and 3 m; with threads on each of its ends, which allows to take advantage of the entire length without discarding offcuts.
Each lance has a built-in coupling, which can be of the threaded, pressed and/or quick coupling type.
Oxycutting of hard metals (stainless steels, Mn, CrMo, white iron, gray iron, etc.), opening of casting openings, slag passages, matte pots, maintenance of conical or gyratory crushers (removal of concave-blankets), mill jackets, pump feed boxes, shaft sweeping, EBT.
Blast Furnace maintenance, refractory parts unclogging.
Rapid ignition in average 5-10 seconds.
Ability to melt any ferrous and non-ferrous material (steel, concrete, concrete, granite, copper, slag, quartz, etc) complementing oxyfuel, pneumatic drills and explosives with very high costs.
Lance Holder
Protects against the formation of undesirable gas mixtures
Connection accessory to inject oxygen or other industrial gases, used for steel lances in different commercial diameters.
It provides safety to the lancing operator, as it is a hot method at very high temperatures.
Easy to maneuver, it allows the proper directioning of the lance and to follow the cutting line on the part being worked on.
Automatically shuts off the oxygen supply at the required level by adjusting the crank. Ensures complete closure of the gas passage and the lancing process is stopped. It has a hose connector suitable for the hose diameter.
Protects the formation of unwanted gas mixtures, without generating leakage or loss of pressure to the connections. It has a triple seal which guarantees safety against gas backflow.
With coarse pitch threads and knob for easy adjustment of the lance inside the housing.
It is the body of the lance holder and houses the non-return seals.
Thermal liner
Load protection
Revestimientos térmicos para el interior de contenedores
Aconsejado para una amplia gama de productos, es una excelente alternativa para usarse en lugar de contenedores refrigerados, reduciendo así los altos costos en transporte.
MINIMIZE THE RISK THAT DIFFERENT TEMPERATURES WILL AFFECT YOUR CARGO
La carga viaja completamente aislada, para todas las medidas de contenedor DRY VAN y Pallet
Lances
Accessories
Lance holder
Lances
CALORIZED
Impressive heat resistance.
Protección probada contra la oxidación.
Lances
THERMAL
Combustion up to 4000 ºC
Optimized for fast start-up
Lances
CERAMICS
ERW welding bead
Threading in EAF, BF
Lances
CONCRETE
Extra resistance to tº.
direct injection to furnaces
LANCE HOLDER
AND PARTS
Backflow preventer for increased safety
Connection for oxygen injection
Find out more!
What is a Thermal Lance?
Thermal Lance Type T | W
-
It does not produce noise or vibrations.
Thermal Lances is a product used to cut and drill large pieces of cast iron, brass, non-ferrous metals, concrete, refractory ceramics, concrete, among others.
It is a tube filled with steel wire that serves as fuel for the generation of a flame.
It exceeds almost 4000°C.It does not produce noise or vibrations.
Thermal Lances is a product used to cut and drill large pieces of cast iron, brass, non-ferrous metals, concrete, refractory ceramics, concrete, among others.
It is a tube filled with steel wire that serves as fuel for the generation of a flame.
It exceeds almost 4000°C. -
Type-T (double tube type)
It can produce a direct flame at high speed to splash materials to make holes or break them quickly.
W-Type (fully packaged wires)
It can produce a wider flame at a higher temperature than Type-T to dissolve solid materials that have high melting points.
Offline use
Smooth ends: Some customers prefer to use the smooth-ended thermal lance when one piece is sufficient to complete the job.
.png)
Use with thread and bushing
Some customers use this way to connect Thermal Lance to each other, without needing to waste Half Thermal Lance.
.png)
Type-T (double tube type)
It can produce a direct flame at high speed to splash materials to make holes or break them quickly.
W-Type (fully packaged wires)
It can produce a wider flame at a higher temperature than Type-T to dissolve solid materials that have high melting points.
Offline use
Smooth ends: Some customers prefer to use the smooth-ended thermal lance when one piece is sufficient to complete the job.
Use with thread and bushing
Some customers use this way to connect Thermic Lance to each other, without needing to waste Thermic Lance in half.